Ismail Ahmed LV.20 S
Oct 30, 2022, 12:15 AM 40 read

What to Look For in a MOT Service

Bulletin Board

If your vehicle is over 3 years old then once a year you will have to, by law, book it in for a MOT Test. The MOT Test is very closely regulated and as such you can only take your vehicle to approved MOT Test centres.   The Test has a long history and was created to try and cut down on the high amount of traffic fatalities that were coming all too common place in the 1950's and 1960's.   What is checked in a MOT Test?   During a test, many different parts of the car are checked and tested to ensure that they are in the correct working order and are not likely to cause an accident. When doing a test the approved and qualified technician is not allowed to take the car a part to do the tests. Everything must remain intact.   The main parts of the car tested are:   Lighting Equipment Steering (including suspension) Brakes Car Tyres Seat Belts Driver's view of the road Windscreen Wipers Windscreen Horn Exhaust system Exhaust emissions All the mirrors The Fuel system Registration plates and Vehicle Identification Number Where to find a MOT Test Centre   Like mentioned before, MOT Test Centres are regulated and have to comply to certain standards before they can carry out MOTs. At present it is estimated that there are around 19,000 authorised test centres throughout Britain.   If a garage has met the requirements and is allowed to carry out test then it will have a blue MOT sign (which consists of three white triangles all pointing into the centre). There are many different web sites set up with a MOT Test Centre search tool and so it should be fairly easy for you to find a test centre near you.   Preparing Your Vehicle for the MOT Test   To keep you vehicle in top condition is it recommended that you book it in for a car service at least every 6,000 miles. By booking it in for a relatively regular car service you can help to keep all the parts of the vehicle, that are vital to your car passing the MOT test, in great condition.   There are some quick and easy things you can do to prepare your car for its MOT test. This not only helps to make the tester's job easier, but also allows you to spot anything that could potentially fail your car Laser wheel alignment and allows you to correct it before the test takes place.   Check that all your tires are in good condition and have a tread depth of at least 1.6mm Check that all the lights are fitted with working bulbs Check the seat belts function properly and are not excessively worn Make sure that your boot is not full or cluttered and that the car is generally clean on both the interior as well as the exterior Make sure that the body work is not overly damaged. Basically, ensure that there are no sharp exposed edges that could harm a pedestrian If all these parts are in good condition then you will have done as much as you can to help ensure that the MOT Welding goes smoothly and successfully. started as a tire retailer under ten years ago and has since become one of the leading tire retailers in the UK.   Recently they have taken the winning formula they applied to selling tires and today offers a number of different car service options from their 1,100 strong approved garage network. Check them out to see how much you could see on a full car service today!  

Comment 0